Month: July 2009

Configurer du Policy-Based Routing dans IOS (PBR)

Posted by – July 21, 2009

Bored with routing protocols to chose best paths to destinations ? (Who do they think they are!!) Hep hep hep! Jump on a route-map and like you favorite star (Peter Packet for the win!) apply policy-based routing on your network!

Here’s the way to do so.
1.Identify traffic to be matched with an ACL

2.Match traffic into a route-map and set condition

3.Apply route-map on an interface!

This looks very straightforward and it is! Check out the video


Cisco Madrouter Contest : Round Twelve!

Posted by – July 15, 2009

Mercredi soir, bonsoir!

Ce soir un petit contest sympatoch mettant en jeu EIGRP! Voici les données

Schéma : deux routeurs connecté à un réseau de type NBMA comme sur le schéma du post précédent.

EIGRP est sur l’AS 100.

R1 : IOS ™ C2600 Software (C2600-IK9O3S3-M), Version 12.3(26), RELEASE SOFTWARE (fc2)

R2 : IOS ™ 2500 Software (C2500-I-L), Version 12.1(27b), RELEASE SOFTWARE (fc1)

Hellos : toutes les 5 sec

Holdtime : 15 sec

K-values : K1=1, K2=0, K3=1, K4=0, K5=0 pour R1 et R2

Edit :

Question: Pourquoi la relation de voisinage n’est pas établit dans les deux sens?

Frame-Relay Multipoint Simple Configuration

Posted by – July 8, 2009

This brief article explains how create a simple F/R Configuration.

Physical Topology:


Logical Topology:



Frame-Relay Point-to-point Simple Configuration

Posted by – July 6, 2009

This brief article explains how create a simple F/R Configuration.

From this :


To this :